>> JAPANESE >>

STOCK LIST FOR SALE

Click!!→ SALES RESULTS

QUARRY EQUIPMENT



JAW CRUSHER
PHOTO
DISCRIPTION OF GOODS
USED "GOH" 40" X 10" SINGLE TOGGLE JAW CRUSHER S/NO. 4010870 WITH NEW MOVEABLE JAW PLATE, NEW FIXED  JAW PLATE, NEW BEARING, ETC.
USED "NAKAYAMA" 30" X 18" SINGLE TOGGLE JAW CRUSHER S/NO. 1130 WITHOUT MOTOR
USED "NAKAYAMA" 30" X 8" JAW CRUSHER S/NO. HS308 WITHOUT MOTOR
USED "KAWASAKI" MODEL KS-6048 (60" X 48") SINGLE TOGGLE JAW CRUSHER S/NO. ST-10575
USED "KAWASAKI" KD-4842 (48" X 42") DOUBLE TOGGLE JAW CRUSHER S/NO.ST10923
USED "KOBE" ALLIS-CHALMERS 36-48ST (48" X 36") JAW CRUSHER S/NO.11-2171
USED "HITACHI" MODEL HR420G MOBILE JAW CRUSHER SIZE 42" X 20"
USED "KAWASAKI" MODEL KS-3018 (30" X 18") SINGLE TOGGLE JAW CRUSHER S/NO. ST11233
USED "KOBE" ALLIS-CHALMERS 48-60ST (60" X 48") SINGLE TOGGLE JAW CRUSHER S/NO.11-2239
UNUSED (NEVER USED) "KAWASAKI" MODEL KD-4232G (42" X 32") DOUBLE TOGGLE JAW CRUSHER S/NO. ST12004 WITHOUT MOTOR
USED "KAWASAKI" MODEL KS-4230G (42" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. ST11025
USED "KAWASAKI" MODEL KS-4230G (42" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. ST11076
USED "KOBE" ALLIS-CHALMERS 48-60ST (60" X 48") SINGLE TOGGLE JAW CRUSHER S/NO.11-0698
USED "KOBE" ALLIS-CHALMERS (A-1) 48" X 42" DOUBLE TOGGLE JAW CRUSHER S/NO. KSW-7230
USED "KURIMOTO"60-48 DOUBLE TOGGLE JAW CRUSHER S/NO. M71-1545
USED "GOH" 48" X 40" SINGLE TOGGLE JAW CRUSHER S/NO. 4840072
USED "OTSUKA" MODEL FS-6048 (60" X 48") SINGLE TOGGLE JAW CRUSHER S/NO. 4190
USED "OTSUKA" 24" X 10" SINGLE TOGGLE JAW CRUSHER S/NO. FJC39
USED "KURIMOTO" 48" X 42" DOUBLE TOGGLE JAW CRUSHER S/NO. M81-478
USED "KEMCO" KUE KEN MODEL C-200 (60" X 48") DOUBLE TOGGLE JAW CRUSHER  S/NO. 200-2004
USED "KEMCO" KUE KEN TYPE MODEL C95 (36" X 24") DOUBLE TOGGLE JAW CRUSHER WITHOUT MOTOR.
USED "KEMCO" KUE KEN MODEL F80N (36" X 10") DOUBLE TOGGLE JAW CRUSHER S/NO. 4018 WITHOUT MOTOR.
USED "KAWASAKI" MODEL KS-3018 (30" X 18") SINGLE TOGGLE JAW CRUSHER S/NO. ST10872
USED "KAWASAKI" MODEL KD-4842G (48" X 42") DOUBLE TOGGLE JAW CRUSHER S/NO. ST11223
USED "GOH" 30" X 18" SINGLE TOGGLE JAW CRUSHER S/NO. 3018297 & S/NO. 3018314  * 2 UNITS FOR SALE
USED "KOBELCO" 42" X 30" ASTRO JAW CRUSHER S/NO. DA10084
USED "NAKAYAMA" 30" X 8" SINGLE TOGGLE JAW CRUSHER S/NO. 30228
USED "KEMCO" MODEL F5S (50" X 8") SINGLE TOGGLE JAW CRUSHER S/NO. 1027
USED "KEMCO" MODEL F4 (40" X 9") SINGLE TOGGLE JAW CRUSHER S/NO. 10940 WITHOUT MOTOR.
USED "KOBE" ALLIS-CHALMERS 42-54 (54" X 42") SINGLE TOGGLE JAW CRUSHER S/NO.11-1323
USED "GOH" 48" X 40" SINGLE TOGGLE JAW CRUSHER S/NO. 4840074
USED "GOH" 40"X 32" SINGLE TOGGLE JAW CRUSHER S/NO. 4032079
USED "KEMCO" MODEL S6 (42" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. 1082
USED "KEMCO" MODEL S6N (42" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. 1114
USED "GOH" 40"X 32" SINGLE TOGGLE JAW CRUSHER S/NO. 4032128
USED "GOH" 48" X 40" SINGLE TOGGLE JAW CRUSHER S/NO. 4840011
USED "KOBE" ALLIS-CHALMERS 30-42 (42" X 30") SINGLE FLY WHEEL TYPE JAW CRUSHER S/NO. 11-0467
USED "KOBE" ALLIS-CHALMERS (A-1) 48" X 42" DOUBLE TOGGLE JAW CRUSHER S/NO. 11-0952
USED "KOBE" ALLIS-CHALMERS 30-42 (42" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. 11-3216
USED "KOBE" ALLIS-CHALMERS 36-48ST (48" X 36") JAW CRUSHER S/NO.11-1731
USED "KOBELCO" 42" X 30" ASTRO JAW CRUSHER S/NO. DA10570
USED "KOBE" ALLIS-CHALMERS 36-48ST (48" X 36") JAW CRUSHER S/NO.11-1831
USED "KOBE" ALLIS-CHALMERS 25-36ST (36" X 25") SINGLE TOGGLE JAW CRUSHER S/NO.11-2389.
USED "KOBE" ALLIS-CHALMERS 48-60 (60" X 48") DOUBLE TOGGLE JAW CRUSHER S/NO. 11-0278 & S/NO. 11-3461 WITHOUT MOTOR (2 UNITS FOR SALE).
USED "KAWASAKI" MODEL KD-6048 (60" X 48") DOUBLE TOGGLE JAW CRUSHER
USED "KEMCO" MODEL S5 (36" X 24") SINGLE TOGGLE JAW CRUSHER S/NO. 1212
USED "OTSUKA" MODEL FS-4840 (48" X 40") SINGLE TOGGLE JAW CRUSHER S/NO. 3191
USED "MAEKAWA" MODEL SC-2415 (24" X 15") SINGLE TOGGLE JAW CRUSHER S/NO. 5918 WITHOUT MOTOR.
USED "KOBE" ALLIS-CHALMERS (A-1) 21-30 (30" X 21") DOUBLE TOGGLE JAW CRUSHER S/NO. 11-1430
USED "NIHON CEMENT" 74" X 54" SINGLE TOGGLE JAW CRUSHER
USED SKID MOUNTED TYPE "NAKAYAMA" MODEL SK2415 (24" X 15") SINGLE TOGGLE JAW CRUSHER S/NO. 1178
WITH HOPPER, PLATE FEEDER, 37KW MOTOR & SWITCH, ETC
USED "GOH" 48" X 8" SINGLE TOGGLE JAW CRUSHER S/NO. 4808794
USED "GOH" MODEL S4 (24" X 15") SINGLE TOGGLE JAW CRUSHER WITHOUT MOTOR
USED "KOBE" ALLIS-CHALMERS 48-60ST (60" X 48") SINGLE TOGGLE JAW CRUSHER
USED "KOBE" ALLIS-CHALMERS 54-74 (74" X 54") DOUBLE TOGGLE JAW CRUSHER S/NO. 11-3466
WITH NEW SPARE JAW PLATES (4 PCS.) NEW SPARE SIDE LINERS (4 PCS,)
USED "KOBE" ALLIS-CHALMERS 30-42 (42" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. 11-3725
USED "KURIMOTO" 48" X 42" SINGLE TOGGLE JAW CRUSHER S/NO. M99-40
USED "KOBELCO" 25-36 (36" X 25") SINGLE JAW CRUSHER S/NO. 11-3471
USED "KAWASAKI" MODEL KD-6048 (60" X 48") DOUBLE TOGGLE JAW CRUSHER S/NO. ST-10795
USED "GOH" MODEL S9 (60" X 50") SINGLE TOGGLE JAW CRUSHER S/NO. 73605010
USED "KEMCO" 42" X 30" SINGLE TOGGLE JAW CRUSHER S/NO. 1037
*REPLACED WITH NEW MOVEABLE JAW PLATE, NEW FIXED JAW PLATE AND NEW TOGGLE PLATE.
USED "RASA" 24" X 15" SINGLE TOGGLE JAW CRUSHER S/NO. C-4980
*RASA IS A JAPANESE BRAND. THE CRUSHER FRAME AND SWING JAW IS VERY STRONG.
UNUSED "KOBE" ALLIS-CHALMERS 42-54 (54" X 42") SINGLE TOGGLE JAW CRUSHER S/NO. 11-3632
USED "KOBE" ALLIS-CHALMERS 54-74 DOUBLE TOGGLE JAW CRUSHER S/NO. 11-3465
WITH NEW SPARE JAW PLATES (4 PCS.) & NEW SPARE SIDE LINERS (4 PCS,)f
USED "RASA" 40" X 9" SINGLE TOGGLE JAW CRUSHER
*RASA BRAND IS MADE IN JAPAN.
USED "METSO" NORDBERG MODEL C100 (40" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. 3695 WITHOUT MOTOR.
USED "KAWASAKI" MODEL KD-4232G (42" X 32") DOUBLE TOGGLE JAW CRUSHER S/NO. C4617
USED "KOBE" ALLIS-CHALMERS 32-42 DOUBLE TOGGLE JAW CRUSHER S/NO. 11-3268
USED "KOBE" ALLIS-CHALMERS 36-48 (48" X 36") SINGLE FLY WHEEL JAW CRUSHER S/NO. 11-0515
*2 UNITS OF SINGLE FLY WHEEL TYPE JAW CRUSHER FOR SALE*
KOBE (KOBELCO) ALLIS-CHALMERS 42-54ST SWING JAW ASSEMBLY WITH SHAFT & 2 BEARINGS FOR SALE*
USED "KURIMOTO"36" X 24" SINGLE TOGGLE JAW CRUSHER S/NO. M7-733
*THE JAW CRUSHER WITH THE SPARE PARTS
USED "KOBE" ALLIS-CHALMERS 42-54 (54" X 42") SINGLE FLY WHEEL JAW CRUSHER S/NO. 11-0384
USED "KOBE" ALLIS-CHALMERS 48-60ST (60" X 48") SINGLE TOGGLE JAW CRUSHER S/NO.11-2179
USED "RASA" 50" X 8" SINGLE TOGGLE JAW CRUSHER S/NO. C5065
*RASA BRAND IS MADE IN JAPAN
USED "KAWASAKI" MODEL KD-4232G (42" X 32") DOUBLE TOGGLE JAW CRUSHER S/NO. ST11894
USED "FURUKAWA" 42" X 30" SINGLE TOGGLE JAW CRUSHER S/NO. 293EA
USED "GOH" 30" X 18" SINGLE TOGGLE JAW CRUSHER S/NO. 3018271
USED "KOBELCO" 60" X 48" ASTRO JAW CRUSHER S/NO. DA10621
USED "GOH" 30" X 7" SINGLE TOGGLE JAW CRUSHER S/NO. 3007390
USED "GOH" 36" X 24" SINGLE TOGGLE JAW CRUSHER
USED "GOH" 48" X 24" SINGLE TOGGLE JAW CRUSHER S/NO. 4824006
USED "GOH" 48" X 40" SINGLE TOGGLE JAW CRUSHER S/NO. 4840049
USED "OTSUKA" MODEL FS-6048 (60" X 48") SINGLE TOGGLE JAW CRUSHER S/NO. 5012 WITHOUT MOTOR.
USED "OTSUKA" MODEL BND6048 (60" X 48") DOUBLE TOGGLE JAW CRUSHER
USED "KEMCO" MODEL S6 (42" X 30") SINGLE TOGGLE JAW CRUSHER S/NO. 1030 WITHOUT MOTOR
*REPLACED WITH BEARINGS, SWING JAW PLATE AND FIXED JAW PLATE.
USED "MAEKAWA" 36" X 24" JAW CRUSHER S/NO. 7698 WITHOUT MOTOR.
*OUR PRICE INCLUDING A NEW SPARE FIXED JAW PLATE.
USED "KEMCO" MODEL S5 (36" X 24") SINGLE TOGGLE JAW CRUSHER S/NO. 1190 WITHOUT MOTOR
USED "RASA" 30" X 9" JAW CRUSHER S/NO. C-6510 WITHOUT MOTOR
*"RASA" BRAND IS MADE IN JAPAN
USED "RASA" 36" X 24" SINGLE TOGGLE JAW CRUSHER S/NO. C-9045 WITHOUT MOTOR



CONE CRUSHER
PHOTO
DISCRIPTION OF GOODS
USED "OTSUKA" MODEL CC-1300 CONE CRUSHER S/NO. 2835
*TYPE CC CAN BE CHANGED TO CEC OR CF ONLY NEED TO CHANGE THE CONCAVE.
USED "NORDBERG" MODEL SX300 CONE CRUSHER WITH HYDRAULIC OIL TANK, HYDRAULIC PRESSURE TANK UNIT AND CONTROL PANEL (WITHOUT MOTOR).
USED "NORDBERG" MODEL 84GD GYRADISC CRUSHER FRAME ASSEMBLY.
*LOCATION; JAPAN
USED "OTSUKA" MODEL CC-900 CONE CRUSHER S/NO. 2682
*TYPE CC CAN BE CHANGED TO CEC OR CF ONLY NEED TO CHANGE THE CONCAVE.
USED "KOBE" ALLIS-CHALMERS 9-45 (45" X 9") HYDROCONE (EXCONE) CRUSHER S/NO. 11-2084
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR.)
*THIS HYDROCONE CRUSHER WITH A ROTARY FEED DISTRIBUTOR
THIS 45" X 9" HYDRO CONE CRUSHER CAN MODIFY AS 45" X 6" ONLY NEED TO CHANGE THE CONCAVE RING.
USED "KOBE"ALLIS-CHALMERS HYDROCONE CRUSHER 10-51 (8-51) TOP SHELL ASSEMBLY
WITH 3 ARM LINERS & 6 RIM LINERS
USED "KOBE" ALLIS-CHALMERS 10-51 (51" X 10") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1953
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 6-45 (45" X 6") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-0554 WITH HYDRAULIC TANK UNIT AND ACCUMULATOR WITHOUT MOTOR
USED "KOBE" ALLIS-CHALMERS 10-51 (51" X 10") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-0566
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "OTSUKA" MODEL CSH-900 CONE CRUSHER S/NO. 4043 WITH HYDRAULIC OIL TANK
USED "KURIMOTO" LH-60C (LH6012)  60" X 12" HYDRAULIC CONE CRUSHER S/NO. M83-166
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KURIMOTO" LH40C (40" X 7") HYDRAULIC CONE CRUSHER S/NO. M80-687
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KAWASAKI" MODEL KM1512G (1200MM X 150MM) 48" X 6" ULTRA CONE CRUSHER S/NO. CC11016
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.
USED "KURIMOTO" LH50F (50" X 3") HYDRAULIC CONE CRUSHER S/NO. M90-121
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KURIMOTO" LH50F (50" X 3") HYDRAULIC CONE CRUSHER S/NO. M80-40
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR).
USED "KURIMOTO" LH60XC (60"X14") 1500MMX350MM HYDRAULIC CONE CRUSHER WITH HYDRAULIC OIL TANK UNIT (WITHOUT MOTOR). *MAXIMUM FEED SIZE: 270 X 380 X 540MM
USED "KOBE" ALLIS-CHALMERS 10-51 (51" X 10") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1078
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 4-60 ( 60"X4") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1289
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR)
USED "KAWASAKI" MODEL KFS-1200L SUPER FINE TYPE CONE CRUSHER S/NO.CC10713
USED  "KOBE" ALLIS-CHALMERS 3-72 (72" X 3") HYDRO CONE (EXCONE) CRUSHER S/NO.11-3093
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR).
*THIS 3-72 (72" X 3") HYDRO CONE CRUSHER CAN BE MODIFIED AS 4-1/2-72 (72" X 4-1/2")
ONLY NEED TO CHANGE THE CONCAVE RING.
USED "KAWASAKI" MODEL KFS-1000L SUPER FINE TYPE CONE CRUSHER (60MM X 1000MM) S/NO.C6692
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.
USED "KAWASAKI" MODEL KM-2010Z CYBAS CONE CRUSHER (200MM X 1000MM) S/NO.C6980
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.
USED "KAWASAKI" MODEL KM-2212G ULTRA CONE CRUSHER (220MM X 1200MM) S/NO.C6391
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.
USED "KOBE" ALLIS-CHALMERS 10-51 (51" X 10") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1956
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 9-45 (45" X 9") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-0612
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR.
USED "KURIMOTO" LH40-2-1/2 HYDRAULIC CONE CRUSHER S/NO. M77-461 WITH HYDRAULIC OIL TANK UNIT
"KAWASAKI" MODEL KFS-1200L SUPER FINE TYPE CONE CRUSHER S/NO.CC10712
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KAWASAKI" MODEL KM-2212G ULTRA CONE CRUSHER (220MM X 1200MM) S/NO.CC10994
USED TOP SHELL & HOPPER FOR KOBELCO 36AF AUTOFINE CRUSHER OR 4-36 HYDRO CONE CRUSHER
USED "UBE-NORDBERG" 1144 OMNICONE CRUSHER S/NO. U-11007
USED "OTSUKA" MODEL CC-900 CONE CRUSHER S/NO. 2663 WITH HYDRAULIC OIL TANK
* TYPE CC CAN BE CHANGED TO CEC OR CF ONLY NEED TO CHANGE THE CONCAVE
USED "KEMCO" KUE-KEN MODEL CTF39-3 (39" X 3") CONE CRUSHER S/NO.39-2048 WITH OIL TANK UNIT
USED "KAWASAKI" MODEL KM-1512G ULTRA CONE CRUSHER (150MM X 1200MM) S/NO.CC10985
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.
* THIS ULTRA CONE CRUSHER WITH AN EXTRA ROTARY FEED DISTRIBUTOR ON THE TOP.
USED "OTSUKA" MODEL CDS-1500 DISC CONE CRUSHER S/NO. 5813
WITH HYDRAULIC OIL TANK AND AN EXTRA OPERATION PANELOF REMOTE CONTROL FOR SETTING ADJUSTMENT
USED "KOBE" ALLIS-CHALMERS 2-36 (36" X 2") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1880
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR)
USED "KEMCO" KUE-KEN MODEL CTM39-6 (39" X 6") CONE CRUSHER S/NO.2223 WITH OIL TANK UNIT
USED "KOBE" ALLIS-CHALMERS 10-51 (51" X 10") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-0564
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR.
USED "KAWASAKI" MODEL KF-0808Z (80MM X 800MM) CYBAS CONE CRUSHER S/NO. CC11383
WITH HYDRAULIC OIL TANK UNIT, AIR FAN AND ACCUMULATOR.
USED "UBE-NORDBERG" MODEL 48GD GYRADISC CRUSHER S/NO. U-48004
WITH HYDRAULIC OIL TANK AND CONTROL PANEL(WITHOUT MOTOR).
*THIS GYRADISC CRUSHER IS SUITABLE FOR PRODUCING THE SAND.
USED "OTSUKA" MODEL CDS-900 DISC CONE CRUSHER S/NO. 4027 WITH HYDRAULIC OIL TANK
*THIS TYPE CDS DISC CONE CRUSHER IS SUITABLE FOR PRODUCING THE SAND.
USED "OTSUKA" MODEL CDS-900 DISC CONE CRUSHER S/NO. 4048 WITH HYDRAULIC OIL TANK
*THIS TYPE CDS DISC CONE CRUSHER IS SUITABLE FOR PRODUCING THE SAND.
USED "KAWASAKI" MODEL KF-1515Z (150MM X 1500MM) CYBAS CONE CRUSHER S/NO. C6973
WITH HYDRAULIC OIL TANK UNIT, AIR FAN AND ACCUMULATOR AND ROTARY FEED DISTRIBUTOR
USED "KURIMOTO" LH5006 (50" X 6") HYDRAULIC CONE CRUSHER S/NO. M89-193
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.
USED "OTSUKA" MODEL CC-1500 CONE CRUSHER S/NO. 5593 WITH HYDRAULIC OIL TANK
USED "OTSUKA" MODEL CSH-1200 SHORT HEAD CONE CRUSHER S/NO. 5440 WITH HYDRAULIC OIL TANK
USED "KOBE" ALLIS-CHALMERS 9-45 (45" X 9") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-2084
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KURIMOTO" LH50F (50" X 3") HYDRAULIC CONE CRUSHER S/NO. M95-150
WITH HYDRAULIC OIL TANK UNIT, AIR FAN & ACCUMULATOR .
USED "KURIMOTO" LH50XC (50" X 12") HYDRAULIC CONE CRUSHER S/NO. M95-151
WITH HYDRAULIC OIL TANK UNIT, AIR FAN & ACCUMULATOR   *MAX FEED SIZE: 220 X 310 X 440MM.
USED "KOBE" ALLIS-CHALMERS 10-60 (60" X 10") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1485
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR.
*THIS 60" X 10" CAN MODIFY AS 60" X 12" ONLY NEED TO CHANGE THE CONCAVE RING.
USED "KOBE" ALLIS-CHALMERS 8-51 (51" X 8") HYDROCONE (EXCONE) CRUSHER S/NO. 11-1384
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR WITHOUT MOTOR
USED "KAWASAKI" MODEL KM-2412Z (1200MM X 240MM) CYBAS CONE CRUSHER S/NO. CC11332
WITH HYDRAULIC OIL TANK UNIT, ACCUMULATOR (WITHOUT MOTOR)
USED "KURIMOTO" LH50XC (50" X 12") HYDRAULIC CONE CRUSHER S/NO. M88-25
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR).
*THIS LH50XC ( 50"X12") HYDRAULIC CONE CRUSHER WITH AN EXTRA ROTARY FEED DISTRIBUTOR.
USED "UBE-SYMONS" MODEL 84GD GYRADISC CRUSHER
WITH HYDRAULIC OIL TANK AND OTHER ACCESSORIES (WITHOUT MOTOR) .
*THIS GYRADISC CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE AND SAND.
USED "SYMONS" 4FT STANDARD CONE CRUSHER S/NO. U-4005 WITH HYDRAULIC OIL TANK UNIT
USED "KAWASAKI" MODEL KM-3015G (300MM X 1500MM) ULTRA CONE CRUSHER S/NO. CC10795
WITH HYDRAULIC OIL TANK UNIT, AIR FAN AND ACCUMULATOR (WITHOUT MOTOR).
*OUR SELLING PRICE INCLUDING A USED SPARE CORE SHAFT ASS'Y.
USED "KAWASAKI" MODEL KF-1012G ULTRA CONE CRUSHER (100MM X 1200MM) S/NO.CC-10775
WITH HYDRAULIC OIL TANK UNIT, AIR FAN AND ACCUMULATOR (WITHOUT MOTOR)
USED "KOBE" ALLIS-CHALMERS 3-1/2" X 51" HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1358
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 3-45 (45" X 3") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-0843
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 7-36 (36" X 7") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-0496
WITH HYDRAULIC OIL TANK AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 10-60 ( 60"X10") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-1960
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KAWASAKI" KC-2010L (200MM X 1000MM) CONE CRUSHER S/NO. CC10575
USED "KAWASAKI" MODEL KF1818G (180MM X 1800MM) ULTRA CONE CRUSHER S/NO. C6324
WITH HYDRAULIC OIL TANK UNIT, ACCUMULATOR AND COOLER
USED "KAWASAKI" MODEL KM-1008Z (100MM X 800MM) CYBAS CONE CRUSHER S/NO. C6892
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.
USED "KOBE" ALLIS-CHALMERS" 11-72 (72" X 11") HYDROCONE CRUSHER S/NO.11-1266 FOR SALE IN JAPAN
USED "UBE-NORDBERG" MODEL 36GD GYRADISC CRUSHER S/NO. 02100
WITH HYDRAULIC OIL TANK AND CONTROL PANEL
*THIS GYRADISC CRUSHER IS SUITABLE FOR PRODUCING THE SAND.
USED "KURIMOTO" LH-6012 (60" X 12")  HYDRAULIC CONE CRUSHER S/NO. M91-126
WITH HYDRAULIC OIL TANK UNIT
USED  "KOBE" ALLIS-CHALMERS" 4-1/2-72 (72" X 4-1/2") HYDRO CONE (EXCONE) CRUSHER S/NO.11-1139
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED  "KOBE" ALLIS-CHALMERS" 14-72 (72" X 14") HYDRO CONE (EXCONE) CRUSHER S/NO.11-1267
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 7-36 (36" X 7") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-0708
WITH HYDRAULIC OIL TANK AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 9-45 (45" X 9") HYDRO CONE (EXCONE) CRUSHER S/NO. 11-2020
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KURIMOTO" LH5009 (50" X 9") HYDRAULIC CONE CRUSHER S/NO. M86-22 WITH HYDRAULIC OIL TANK UNIT
USED "KURIMOTO" LH5009 (50" X 9") HYDRAULIC CONE CRUSHER S/NO. M-79-0899
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KURIMOTO" LH5009 (50" X 9") HYDRAULIC CONE CRUSHER S/NO. M-93-83-473
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KURIMOTO" LH50C (50" X 9") HYDRAULIC CONE CRUSHER S/NO. M84-71 WITH HYDRAULIC OIL TANK UNIT
AND ACCUMULATOR (WITHOUT MOTOR).
USED "KAWASAKI" KC2710Z (270MM X 1000MM) CYBAS CONE CRUSHER S/NO.CC-11469
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KOBE" ALLIS-CHALMERS 10-51 (51" X 10") HYDROCONE (EXCONE) CRUSHER S/NO. 11-2992
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR WITHOUT MOTOR  
USED "METSO" MODEL HP300 CONE CRUSHER S/NO. 37NF5008 WITH HYDRAULIC OIL TANK UNIT (WITHOUT MOTOR)
BRAND NEW KOBE ALLIS-CHALMERS HYDROCONE CRUSHER (EXCONE CRUSHER) 51" MAINSHAFT ASSEMBLY
PRICE INCLUDING NEW DUST SEAL RING & DUST SEAL RETAINER RING.
USED KOBE ALLIS-CHALMERS HYDROCONE CRUSHER (EXCONE CRUSHER) 51" MAINSHAFT ASSEMBLY
USED "KURIMOTO" LH60C  ( 60" X 12") HYDRAULIC CONE CRUSHER S/NO. M91-126
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR)


TOP OF THIS PAGE




GYRATORY CRUSHER
PHOTO
DISCRIPTION OF GOODS
USED "KOBELCO" 11-36 (36" X 11") DH GYRATORY CRUSHER S/NO. 11-3784 WITH HYDRAULIC TANK UNIT AND
ACCUMULATOR.
USED "UBE-NORDBERG" MODEL 66GD GYRADISC CRUSHER WITH HYDRAULIC OIL TANK AND CONTROL PANEL (WITHOUT MOTOR)
USED "KOBELCO" 13-54 DH GYRATORY CRUSHER S/NO. 11-3103 WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBELCO" 12-45 (45" X 12") DH GYRATORY CRUSHER S/NO. DA-10198
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBELCO" 12-45 (45" X 12") DH GYRATORY CRUSHER S/NO. 11-2542
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR)
USED "KOBELCO" 12-45 (45" X 12") DH GYRATORY CRUSHER S/NO. 11-3073
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBELCO" 10-45 (45" X 10") DH GYRATORY CRUSHER S/NO. 11-3413
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR (WITHOUT MOTOR)
USED "KOBELCO" 14-45 (45" X 14") DH GYRATORY CRUSHER S/NO. 11-2855 WITH HYDRAULIC TANK UNIT AND
ACCUMULATOR.
(2 UNITS) USED "KAWASAKI" MODEL KG-5516 SUPER COARSE GYRATORY CRUSHER WITH HYDRAULIC OIL TANK UNIT,
COOLER FAN AND ACCUMULATOR. S/NO. KG10151 & S/NO. KG10152.
USED "KOBELCO" 9-36 (36" X 9") DH GYRATORY CRUSHER S/NO. 11-3598
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR.
*THIS 9-36 (36" X 9") DH GYRATORY CRUSHER CAN MODIFY AS 36" X 11" OR 36" X 13"
ONLY NEED TO CHANGE THE CONCAVE RING.
USED "KAWASAKI" MODEL KG-4515 (450MM X 1500MM) SUPER COARSE GYRATORY CRUSHER S/NO. C6131
WITH HYDRAULIC OIL TANK UNIT, AIR FAN AND ACCUMULATOR.
USED "KAWASAKI" MODEL KG-4515 (450MM X 1500MM) SUPER COARSE GYRATORY CRUSHER S/NO. KG10140
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR.. (WITHOUT MOTOR).
*THIS KG-4515 (450MM X 1500MM) CAN BE MODIFIED AS KG-5015 (500MM X 1500MM) ONLY NEED TO CHANGE THE
 CONCAVE RING.
USED "KAWASAKI" MODEL KU-1350 (1350MM X 480MM) ULTRA COARSE GYRATORY CRUSHER S/NO. KG10119 WITH
HYDRAULIC OIL TANK UNIT, AIR FAN AND ACCUMULATOR (WITHOUT MOTOR)
FEED SIZE: 480MM X 340MM X 240MM.
USED "KAWASAKI" MODEL KU-1000 (1000MM X 350MM) ULTRA COARSE GYRATORY CRUSHER S/NO. C6959
WITH HYDRAULIC OIL TANK UNIT AND ACCUMULATOR
USED "KAWASAKI" MODEL KU-1000 (1000MM X 350MM) ULTRA COARSE GYRATORY CRUSHER S/NO. KG10227 WITH
HYDRAULIC OIL TANK UNIT, AIR COOLER AND ACCUMULATOR (WITHOUT MOTOR)
USED "KAWASAKI" MODEL KU-1000 (1000MM X 350MM) ULTRA COARSE GYRATORY CRUSHER S/NO. KG10177 WITH
HYDRAULIC OIL TANK UNIT, AIR COOLER AND ACCUMULATOR (WITHOUT MOTOR).
FEED SIZE: 350MM X 245MM X 175MM.
USED "KOBELCO" 10-54 (54" X 10") DH GYRATORY CRUSHER S/NO. 11-3612
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR
USED "KOBELCO" 13-54 (54" X 13") DH GYRATORY CRUSHER S/NO. 11-3690
WITH HYDRAULIC TANK UNIT AND ACCUMULATOR


IMPACT CRUSHER
PHOTO
DISCRIPTION OF GOODS
USED "NITTETSU-HARDOPACT" MODEL PEH160/140 IMPACT CRUSHER WITH OIL TANK UNIT.
USED "KOBELCO" MODEL 2015 DHPACT CRUSHER (IMPACT CRUSHER) WITH HYDRAULIC PUMP UNIT
USED "KAWASAKI" SKID MOUNTED TYPE MODEL KAP-45N IMPACT CRUSHER
USED "KOBELCO" MODEL 1310 DHPACT CRUSHER (IMPACT CRUSHER) S/NO. DA10267
WITH HYDRAULIC PUMP UNIT
USED METSO "NORDBERG" MODEL NP1213M IMPACT CRUSHER S/NO. 20360403.
USED "KAWASAKI" MODEL KIS-1315HM SUPER IMPELLER (IMPACT CRUSHER) S/NO. KS10686
USED "KOBELCO" MODEL 1010 DHPACT CRUSHER (IMPACT CRUSHER) S/NO. DA10387
WITH HYDRAULIC PUMP UNIT
USED "KOBUKURO-HARDOPACT" MODEL PEH-3 100/105 IMPACT CRUSHER S/NO. PH-2362III
WITH HYDRAULIC PUMP UNIT


AUTOFINE CRUSHER
PHOTO
DISCRIPTION OF GOODS
USED "KOBELCO" MODEL 36AF AUTOFINE CRUSHER S/NO. 11-1798
WITH HYDRAULIC OIL TANK & OTHER ACCESSORIES
*THE AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE AND MINUS 5MM
USED TOP SHELL & HOPPER FOR KOBELCO 36AF AUTOFINE CRUSHER OR 4-36 HYDRO CONE CRUSHER
USED "KOBE" ALLIS-CHALMERS MODEL 45AF AUTOFINE CRUSHER S/NO. 11-3272 WITH HYDRAULIC OIL TANK UNIT,
ACCUMMULATOR & AUTOMATIC CONTROL PANEL. *THIS AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE.
USED "KOBELCO" MODEL 60AF AUTOFINE CRUSHER S/NO. 11-1505 WITH HYDRAILIC OIL TANK UNIT, ACCUMULATOR
& AUTOMATIC CONTROL PANEL.  *THIS AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE.
USED "KOBE" ALLIS-CHALMERS MODEL 45AF AUTOFINE CRUSHER S/NO. 11-1340 WITH HYDRAULIC OIL TANK UNIT, ACCUMMULATOR & AUTOMATIC CONTROL PANEL.
*THIS AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE.
USED "KOBE" ALLIS-CHALMERS MODEL 45AF AUTOFINE CRUSHER S/NO. 11-3207
WITH HYDRAULIC OIL TANK UNIT, ACCUMMULATOR & AUTOMATIC CONTROL PANEL.
*THIS AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE.
USED "KOBE" ALLIS-CHALMERS MODEL 30AF AUTOFINE CRUSHER S/NO. 11-2243 WITH HYDRAULIC OIL TANK UNIT,
ACCUMMULATOR& AUTOMATIC CONTROL PANEL
*THE AUTOFINE CRUSHER IS SUITABLE FOR PRODUCING THE SMALL STONE AND MINUS 5MM.
USED "KOBELCO" MODEL 36AF AUTOFINE CRUSHER S/NO. 11-2002 WITH HYDRAULIC OIL TANK & OTHER ACCESSORIES (WITHOUT MOTOR).  


ROLL CRUSHER

PHOTO
DISCRIPTION OF GOODS
USED "ISHIKAWA-TOKI" ROLL CRUSHER WITH A 7.5KW MOTOR. CAPACITY 10T/H.


MOBILE CRUSHER
PHOTO
DISCRIPTION OF GOODS
USED "KOMATSU" MODEL BR350JG-1 MOBILE CRUSHER S/NO. 1236 WITH 36" X 20"JAW CRUSHER, FEEDER,
MAGNETIC SEPARATOR AND BELT CONVEYOR.
USED "KOMATSU" MOBILE CRUSHER MODEL BR100R-1 S/NO. 1024 WITH IMPACT CRUSHER.
USED "KOBELCO" MODEL KMC200 MOBILE CRUSHER S/NO. WZ-01031 (2654 HOURS)
WITH 30" X 18"JAW CRUSHER S/NO. 0248, PLATE FEEDER & MAGNETIC SEPARATOR, ETC.  
USED "KOBELCO" MODEL KMC200 MOBILE CRUSHER WITH 30" X 18"JAW CRUSHER S/NO. DA100222,
PLATE FEEDER & MAGNETIC SEPARATOR, ETC.
USED "ALLIS" SVEDALA-ARBRA TYPE CM-120F (48" X 40") MOBILE CRUSHER ORDER NO. (S/NO.) 3.40126.
(MADE IN SWEDEN).THIS MOBILE CRUSHER ONLY USED ABOUT 3 HOURS. MAXIMUM CRUSHING CAPACITY: 610T/H.
USED NORDBERG METSO LOKOTRACK MODEL LT105 MOBILE JAW CRUSHER S/NO. 73545 (JAW CRUSHER SIZE 1060MM X 700MM ) 42" X 28"
USED NORDBERG LOKOTRACK MODEL LT125 MOBILE JAW CRUSHER MODEL C125B 1250MM X 950MM.


ROD MILL (SAND MAKING MACHINE)
PHOTO
DISCRIPTION OF GOODS
USED "KOBE" ALLIS-CHALMERS 2100MM X 3600MM (7' X 12') ROD MILL S/NO. 12-0327 WITHOUT MOTOR


CRUSHING PLANT
PHOTO
DISCRIPTION OF GOODS
USED STONE CRUSHING & SCREENING PLANT CAPACITY 400T/H
USED "FURUKAWA" 42" X 30" JAW CRUSHER PLANT WITH "RASA" 4' X 12' VIBRATING GRIZZLY FEEDER & "NIPPON SHARYO" 400KVA GENERATOR, RELATED CONVEYOR, OPERATION PANEL, ETC. *CRUSHING CAPACITY: 250T/H. (INSTALLATION: 2014).
UNUSED (NEVER USED) KYC SEMI-PORTABLE TYPE STONE CRUSHING &
SCREENING PLANT MODEL PFJ-4 (24" X 15" JAW CRUSHER) & PCS-900 (36" CONE CRUSHER)
WITH THE RELATED ACCESSORIES SUCH AS THE HOPPER, PLATE FEEDER, VIBRATING SCREEN,
MOTOR AND BELT CONVEYOR, ETC. EXCEPT THE GENERATOR. (CAPACITY: 30T/HOUR AT 20MM UNDER PRODUCTS).





SUPER SANDER (SAND MAKING MACHINE)
PHOTO
DISCRIPTION OF GOODS
USED "KAWASAKI" MODEL KMC-1310R SUPER SANDER S/NO. C-9417 WITH HYDRAULIC PUMP UNIT
USED "KAWASAKI" MODEL KMC-1310R SUPER SANDER S/NO. C-9313 WITH HYDRAULIC PUMP UNIT
USED "KAWASAKI" MODEL KMC-1010R SUPER SANDER S/NO. C-9177 WITH HYDRAULIC PUMP UNIT
USED"KAWASAKI" MODEL KMC-1610R SUPER SANDER S/NO. HC10380
USED"KAWASAKI" MODEL KMC-1610R SUPER SANDER S/NO. HC10283


SAND CLASSIFIER
PHOTO
DISCRIPTION OF GOODS
USED "PACIFIC" BRAND MODEL HS-3545S2 SAND CLASSIFIER S/NO. HR-230-703
WITH 3.7KW MOTOR (CAPACITY 120T/H)
USED "KIKOSHA" BRAND MODEL KUC-365S SAND CLASSIFIER WITH SUMITOMO CYCLO GEAR MOTOR & URAS MOTOR.


VIBRATING SCREEN
PHOTO
DISCRIPTION OF GOODS
USED "FURUKAWA" 9' X 20' (SINGLE DECK) VIBRATING SCREEN S/NO. F30131
USED "KINKI" TYPE KR-E820 (8' X 20') 2 DECKS VIBRATING SCREEN S/NO. R-2302 WITH MOTOR
USED "FURUKAWA" 7' X 16' HORIZONTAL TYPE VIBRATING SCREEN (2 DECKS) S/NO. 01077 WITH MOTOR.
USED "KOBELCO" HLW TYPE 7' X 20' RIPPLE FLOW VIBRATING SCREEN (2 DECKS) S/NO. 13-4180 WITH MOTOR
USED "KAWASAKI" NDS TYPE 6' X 16' HORIZONTALVIBRATING SCREEN (SINGLE DECK) S/NO. DS11034 WITH MOTOR
USED "KAWASAKI" NDS TYPE 7' X 16' HORIZONTALVIBRATING SCREEN (2 DECKS) S/NO. DS11033 WITH MOTOR
USED "KAWASAKI" NDS TYPE 7' X 20' HORIZONTALVIBRATING SCREEN (2 DECKS) S/NO. DS10843 WITH MOTOR
USED "FINLAY" MODEL 590 SEMI-PORTABLE HYDRAGRID SCREEN (2 DECKS) S/NO. FD460181
WITH DEUTZ ENGINE MODEL F4L912.
USED READ WASTE MANAGER MODEL WM3000 HYDRAULIC OPERATED VIBRATING SCREEN 2 DECKS (MADE IN USA)
USED "KINKI" NLH-512 (5' X 12') 3 DECKS HORIZONTAL TYPE VIBRATING SCREEN S/NO. S-8520 WITH MOTOR
USED "KINKI" NLH-820 (8' X 20') 2 DECKS HORIZONTAL TYPE VIBRATING SCREEN S/NO. S-4986
WITH 45KW MOTOR (200V)
USED "RASA" HORIZONTAL TYPE 3' X 8' VIBRATING SCREEN S/NO. S-903149 (3 DECKS) WITH MOTOR
*RASA BRAND IS MADE IN JAPAN.
USED "KINKI" HORIZONTAL TYPE 5' X 14' VIBRATING SCREEN S/NO. S-1645 (3 DECKS) WITH MOTOR
*THIS VIBRATING SCREEN FITS THE WATER WASH DEVICE
USED "KINKI" HORIZONTAL TYPE 4' X 12' VIBRATING SCREEN S/NO. S-3548 (2.5 DECKS) WITH MOTOR
USED "KOBELCO" HORIZONTAL TYPE 2400MM X 6000MM (8' X 20') 2 DECKS VIBRATING SCREEN S/NO. DB10587
USED "FURUKAWA" 1800MM X 4200MM (6' X 14') HORIZONTAL TYPE VIBRATING SCREEN (2 DECKS) S/NO. 826
WITH MOTOR
RECONDITIONED & REPAINTED "KINKI" HORIZONTAL TYPE 5' X 12' (3 DECKS) VIBRATING SCREEN S/NO. S-6652
WITH MOTOR
USED "FURUKAWA" 7' X 18' HORIZONTAL TYPE VIBRATING SCREEN (1 DECK) S/NO. 01494 WITH MOTOR
USED "FURUKAWA" 2100MM X 6000MM (7' X 20') RIPPLE FLOW TYPE VIBRATING SCREEN (2 DECKS) S/NO. 29819
WITH MOTOR.
USED "KYC" HORIZONTAL TYPE 5' X 12' VIBRATING SCREEN (3 DECKS) S/NO. 512311
USED "KOBELCO" 920MM X 2440MM TDML (3' X 8') HORIZONTAL TYPE VIBRATING SCREEN (3 DECKS)
S/NO. DB 11094 WITH MOTOR
USED "KINKI" MODEL KR-512 (5'X12') VIBRATING GRIZZLY SCREEN  S/NO. R-1380.WITH 22KW MOTOR
(4 POLE/200V) AND ACCESSARIES.
RECONDITIONED & REPAINTED "KINKI" NLH-412 (4' X 12') 3 DECKS HORIZONTAL TYPE VIBRATING SCREEN S/NO. S-9419 WITH MOTOR.


VIBRATING FEEDER
PHOTO
DISCRIPTION OF GOODS
USED "KOBE" ALLIS-CHALMERS VFGH 6' X 16' (1830MM X 4880MM) VIBRATING GRIZZLY FEEDER S/NO. 14-1028
WITH 30KW VARIABLE SPEED MOTOR
USED "GOH" 5' X 10'  VIBRATING GRIZZLY FEEDER WITH MOTOR
*THIS SIZE SUITABLE FOR USING 48" X 40" OR 48" X 42" JAW CRUSHER.
USED "KOBELCO" DHS-6 (1800MM X 4800MM) 6' X 16' VIBRATING GRIZZLY FEEDER S/NO. 14-1168
WITH 30KW VARIABLE SPEED MOTOR.
*THIS 6' X 16' VIBRATING GRIZZLY FEEDER IS SUITABLE FOR 60" X 48" OR 60" X 50" JAW CRUSHER.
USED "KINKI" MODEL KPF-GH414 (4' X 14') VIBRATING GRIZZLY FEEDER WITH 22KW VARIABLE SPPED MOTOR AND
SPARE VIBRATOR (1 UNIT)  SPARE 22KW VARIABLE MOTOR (1 UNIT)
USED "KOBE" ALLIS-CHALMERS VFGH-6' X 16' VIBRATING GRIZZLY FEEDER S/NO. 14-0458 WITH 30KW VARIABLE
SPEED MOTOR.    *THIS 6' X 16' VIBRATING GRIZZLY FEEDER IS SUITABLE FOR 60" X 48" JAW CRUSHER.
USED "KOBE" ALLIS-CHALMERS VFG TYPE 3' X 8' VIBRATING GRIZZLY FEEDER S/NO. 14-1069 WITH MOTOR
*THIS 3' X 8' VIBRATING GRIZZLY FEEDER IS SUITABLE FOR 36" X 24", 36" X 25" OR 30" X 18" JAW CRUSHER.
USED "KOBE" ALLIS-CHALMERS VFGH TYPE 7' X 18' (2140MM X 5490MM) VIBRATING GRIZZLY FEEDER
S/NO. 11-0897 WITH 37KW VARIABLE SPEED MOTOR.
USED "SHINKO" MODEL RFH-160B RUBBER SPRING FEEDER WITH 3.7KW INVERTER CONTROLLER (50HZ/200V/400V).
USED "KOBELCO" HEAVY DUTY TYPE AFH (APRON FEEDER) 2200MM X 6170MM WITH INVERTOR MOTOR CAPACITY:
2000T/H.     MADE IN JULY 2001 (ONLY USED 20 MONTHS)
USED "KOBE" ALLIS-CHALMERS VFGH TYPE 7' X 18' VIBRATING GRIZZLY FEEDER S/NO. 11-0639
WITH 37KW VARIABLE SPEED MOTOR.
UNUSED (NEVER USED) KOBELCO VFGH TYPE 2140MM X 5490MM (7' X 18') VIBRATING GRIZZLY FEEDER S/NO. 14-0883 WITH UNUSED (NEVER USED) TOSHIBA 37KW VARIABLE SPEED MOTOR.
USED "RASA" 4' X 12' VIBRATING GRIZZLY FEEDER S/NO. LGF-120248
WITH 11KW. 50HZ/200V VARIABLE SPEED MOTOR  *RASA BRAND IS MADE IN JAPAN
USED "SHINKO" MODEL RFH-260B VIBRATING RUBBER SPRING FEEDER (1500MM X 1800MM) WITH 5.5KW MOTOR.
*CAPACITY: 900T/H TO 1700T/H.
USED "KAWASAKI" APRON FEEDER MODEL KAF 16-51 (1600MM X 5100MM) WITH 15KW MOTOR/50HZ/400V.
USED "FURUKAWA" 1500MM X 3600MM (5' X 12') VIBRATING GRIZZLY FEEDER S/NO. 300 WITH MOTOR
USED "RASA" 1200MM X 3600MM (4X12-LGF) VIBRATING GRIZZLY FEEDER S/NO. 120291 WITH 4 DECKS AND 11KW VARIABLE SPEED MOTOR
USED "KINKI" MODEL KPF-GH3x10 (3' X 10') VIBRATING GRIZZLY FEEDER
WITH 11KW VARIABLE SPEED MOTOR 50HZ/200V
USED "KINKI" MODEL KPF-GH512 (5' X 12') VIBRATING GRIZZLY FEEDER
WITH 22KW VARIABLE SPEED MOTOR 50HZ/200V. (2 UNITS FOR SALE)
USED "KOBE" ALLIS-CHALMERS VFGH TYPE 5' X 14' VIBRATING GRIZZLY FEEDER S/NO. 11-0835
USED "KOBELCO" VFGH TYPE 4' X 12' (1220MM X 3660MM) VIBRATING GRIZZLY FEEDER S/NO. 14-1102
USED "KOBELCO" VFGH TYPE 1220MM X 3660MM (4' X 12') VIBRATING GRIZZLY FEEDER WITH MOTOR.
USED "KOBELCO" HEAVY DUTY TYPE AFH (APRON FEEDER) 1800MM X 6550MM S/NO. 14-0687
WITH INVERTOR MOTOR


MAGNETIC SEPARATOR
PHOTO
DISCRIPTION OF GOODS
USED MAGNETIC SEPARATOR CODE NO.A & CODE NO.B


CRAWLER DRILL
PHOTO
DISCRIPTION OF GOODS
USED "INGERSOLL-RAND" MODEL CDH-830C HYDRAULIC CRAWLER DRILL S/NO. W00800200
WITH DRIFTER  MODEL YH-70.  *HOUR METER: 936 HOURS
USED "FURUKAWA" MODEL HCR-9DSU HYDRAULIC CRAWLER DRILL S/NO. 511654 (6256 HOURS)


BREAKER
PHOTO
DISCRIPTION OF GOODS
USED "KURIMOTO" HYDRAULIC OPERATED BREAKER MODEL HB5G (CHISEL DIAMETER 75MM) S/NO. 213
WITH THE HYDRAULIC PACK UNIT.


METAL DETECTOR
PHOTO
DISCRIPTION OF GOODS
USED "NISSIN" METAL DETECTOR MODEL ND-150D-10040 FOR BELT WIDTH 450MM TO 800MM USE.
RECONDITIONED & REPAINTED NISSIN BRAND MODEL ND-150D-10040 METAL DETECTOR FOR BELT WIDTH 450MM UP TO 800MM USE


STONE CRUSHER PARTS
PHOTO
DISCRIPTION OF GOODS
USED "OTSUKA" CORE SHAFT OF MODEL CSH-900 CONE CRUSHER
USED BEVEL GEAR & USED BEVEL PINION WITH COUNTER SHAFT ASS'Y FOR  "KOBE" ALLIS-CHALMERS 36" CRUSHER
USED TOP SHELL & HOPPER FOR KOBELCO 36AF AUTOFINE CRUSHER OR 4-36 HYDRO CONE CRUSHER
NEW ECCENTRIC BUSH (MADE BY KOBE STEEL, LTD.) FOR "KOBE" ALLIS-CHALMERS 51" HYDRO CONE CRUSHER
USED COUNTER SHAFT ASS'Y WITH BEVEL PINION FOR "KOBE" ALLIS-CHALMERS 51" HYDRO CONE CRUSHER
NEW TOGGLE PLATE FOR "OTSUKA" MODEL FS-5442B JAW CRUSHER
LUBE. OIL TANK UNIT FOR KOBE (KOBELCO) GYRATORY CRUSHER AND HYDROCONE CRUSHER
GENUINE PARTS OF STATIONARY JAW PLATE & SWING JAW PLATE OF KOBE ALLIS-CHALMERS 48-60ST JAW CRUSHER.
GENUINE PARTS OF NEW DUST COLLAR (1141-0) FOR KOBELCO 54" DH GYRATORY CRUSHER.
(MADE BY KOBE STEEL, LTD.)
GENUINE PARTS OF NEW BEVEL GEAR (1231-0) & NEW PINION (1411-0) WITH PINION SHAFT ASS'Y &
PISTON WEARING PLATE (1341-0) FOR KOBELCO 54" DH GYRATORY CRUSHER
CODE NO. WT-4874 OF USED MAIN SHAFT ASS'Y (A) WITH MANTLE CORE, MANTLE & HEAD CENTER FOR
KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
CODE NO. WT-4874 OF USED MAIN SHAFT ASS'Y (B) WITH MANTLE CORE, MANTLE & HEAD CENTER FOR
KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
NEW MANTLE OF KOBE ALLIS-CHALMERS 45" HYDRO CONE CRUSHER *CODE NO. T45-A
USED SPIDER CAP OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
USED CYLINDER ASS'Y OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
USED SPIDER BUSH OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
USED BOTTOM SHELL BUSH OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
USED ECCENTRIC, ECCENTRIC BUSH, ECCENTRIC BUSH KEY, BEVEL GEAR, BEVEL GEAR KEY, ECCENTRIC WEARING PLATE & ECCENTRIC SUPPORT PLATE OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
USED PINION SHAFT HOUSING, PINION HOUSING STUD, PINION HOUSING STUD NUT, PINION HOUSING STUD LOCK NUT, PINION SHAFT HOUSING OIL LEVEL PEA PLUG, PINION SHAFT HOUSING OIL LEVEL PEA COCK & V-SHEAVE (DRIVEN) OF KOBE ALLIS-CHALMERS 48-74 GYRATORY CRUSHER
USED MAIN SHAFT ASS'Y WITH MANTLE CORE, MANTLE & HEAD CENTER
OF KOBE ALLIS-CHALMERS 42-65 GYRATORY CRUSHER
NEW "OTSUKA" HOPPER LINER WITH TOP CELL LINER OF 1200 CONE CRUSHER
USED DYNACOOL BRAND AIR COOLER (HEAT EXCHANGER) FOR COOLING THE CONE CRUSHER
RECONDITIONED AND REPAINTED "KAWASAKI" IMPACT CRUSEHR MODEL SAP-4/150N ROTOR
USED "OTSUKA" OIL TANK UNIT OF 1200 CONE CRUSHER
USED TOP SHELL FOR "KOBE" ALLIS-CHALMERS 6-45 HYDROCONE CRUSHER
USED TOP SHELL WITH CONCAVE RING FOR "KOBE" ALLIS-CHALMERS 6-45 HYDROCONE CRUSHER
USED CONCAVE RING OF KOBE ALLIS-CHALMERS 9-45 HYDRO CONE CRUSHER *CODE NO. 9-45-A
USED CONCAVE RING OF KOBE ALLIS-CHALMERS 10-51 HYDRO CONE CRUSHER *CODE NO. 10-51-A
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 6-51 HYDRO CONE CRUSHER *CODE NO. 6-51-A
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 3-45 HYDRO CONE CRUSHER *CODE NO. 3-45-A
USED CONCAVE RING OF KOBE ALLIS-CHALMERS 3-45 HYDRO CONE CRUSHER *CODE NO. 3-45-B
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 4-36 HYDRO CONE CRUSHER *CODE NO. 4-36-A
NEW CONCAVE RING OF KOBE ALLIS-CHALMERS 4-36 HYDRO CONE CRUSHER *CODE NO. 4-36-B
BOTTOM BUSH OF "KOBE" 7-36 HYDRO CONE CRUSHER
GENUINE PARTS OF NEW MANTLE AND NEW CONCAVE FOR OTSUKA CSH-1680 AND CSH-1300 CONE CRUSHERS
BRAND NEW "OTSUKA" CC-1300, CEC-1300 AND CF-1300 HOPPER LINER & TOP CELL LINER & PART NO. 1201
RIB LINER
USED PITMAN ASS'Y WITH 2 PULLEYS FOR "KOBE" ALLIS-CHALMERS (A-1) 48" X 42" DOUBLE TOGGLE JAW CRUSHER
NEW CONCAVE SUPPORT RING PART NO. 1621-0 FOR KOBE ALLIS-CHALMER 7-36 OR 4-36 OR 2-36 USE


TOP OF THIS PAGE




SHIP

WORK VESSEL
PHOTO
DISCRIPTION OF GOODS
CODE NO. WT-389FB OF USED FLOATING CRANE VESSEL LIFTING CAPACITY 250 TONS & PUSH BOAT OF 1600PS
1000PS (500PS X 2 ENGINES) ANCHOR HANDLING TUG BOAT M/V. SHINSEI MARU NO.6
(NON-PROPELLED) USED "KURIMOTO"8" SAND PUMP VESSEL (DREDGER) 16.8M X 6.0M X 1.3M
CODE NO. WT-395FB OF USED FLOATING CRANE VESSEL LIFTING CAPACITY 180 TONS(M/V. NISSHIN MARU)
WITH ONE SMALL CREW BOAT.
PILOT BOAT M/V. MARINE 2 & M/V. POLE STAR 2 FOR SALE.
SPRIT HOPPER BARGE 39.00M X 12.00M X 3.80M OF CAPACITY 700M3
CODE NO. WT-406FB OF USED FLOATING CRANE VESSEL LIFTING CAPACITY 180 TONS
(M/V. TAKARA MARU NO.5) MADE IN DECEMBER 1987.
*THIS FLOATING CRANE WITH 6.0M3 GRAB BUCKET WHICH CAN BE USED AS A DREDGER.
CODE NO. WT-413SC OF USED SAND CARRIER/DREDGER
(M/V. TENJIN MARU NO.1) MADE IN JULY 1986.
*THIS SAND CARRIER/DREDGER WITH 4M3 GRAB BUCKET & 3M3 ORANGE PEEL BUCKET.
1100HP TUG BOAT/PUSHER BOAT (OVERALL LENGTH 23.78M) REGISTERED 21.79M X 6.40M X 3.50M WITH 550PS X 2 ENGINES *NAME OF VESSEL: CHIYO MARU NO.35
CARGO HOLD BARGE 82.5M X 18.0M X 5.6M (DRAFT: 4.9M) DEAD WEIGHT: 5500 TONS FOR SALE IN JAPAN
(NON-PROPELLED)
NON-PROPELLED FLOATING CRANE BARGE 43M X 18M X 3M WITH SKK-1100DT-A CRANE OF LIFTING CAPACITY
120 TONS.    BOOM LENGTH: 34.05M.    HOOK: 120 TONS & 20 TONS.



CRANE BUCKET
PHOTO
DISCRIPTION OF GOODS
CODE NO. WT-10M3-GDB-102N (CAPACITY 10M3) GRAB DREDGER BUCKET.
CODE NO. WT-5M3-GDB-81GH (CAPACITY 5M3) GRAB DREDGER BUCKET.
CODE NO. WT-5M3-OB-110HG (CAPACITY 5M3) ORANGE PEEL BUCKET.
CODE NO. WT-4M3-GB-73GO (CAPACITY 4M3) GRAB DREDGER BUCKET.
CODE NO. WT-4M3-GDB-127HG (CAPACITY 4M3) DREDGING GRAB BUCKET
CODE NO. WT-6M3-GB-58H (CAPACITY 6M3) GRAB BUCKET.
CODE NO. WT-4.5M3-GB-67GH (CAPACITY 4.5M3) GRAB BUCKET.
CODE NO. WT-4M3-GB-56H (CAPACITY 4M3) GRAB BUCKET.
CODE NO. WT-3.5M3-GB-77GO (CAPACITY 3.5M3) GRAB BUCKET.
CODE NO. WT-5M3-OB-59H (CAPACITY 5M3) ORANGE PEEL BUCKET.
CODE NO. WT-4M3-OB-52H (CAPACITY 4M3) ORANGE PEEL BUCKET.
CODE NO. WT-4M3-OB-157G (CAPACITY 4M3) ORANGE PEEL BUCKET
CODE NO. WT-4M3-GB-158G (CAPACITY 4M3) GRAB BUCKET
CODE NO. WT-3.5M3-OB-57H (CAPACITY 3.5M3) ORANGE PEEL BUCKET.
CODE NO. WT-3.2M3-OB-54H (CAPACITY 3.2M3) ORANGE PEEL BUCKET.
CODE NO. WT-5M3-GDB-118HG (CAPACITY 5M3) DREDGER BUCKET (GRAB BUCKET)  *WEIGHT: 23 TONS
CODE NO. WT-6M3-DB-165G (CAPACITY 6M3) HEAVY DUTY GRAB BUCKET  *WEIGHT: 35 TONS
CODE NO. WT-6M3-DB-167G (CAPACITY 6M3) GRAB BUCKET (DREDGER BUCKET) FOR SALE IN JAPAN.
*MADE BY KOEI, JAPAN



WINCH
PHOTO
DISCRIPTION OF GOODS
USED "KOYO" TYPE KHW-2007 HYDRAULIC WINCH CAPACITY 15 TONS. (2 UNITS FOR SALE)
4 UNITS OF USED "NITCHITSU" WINCHES (CAPACITY 30 TONS) AND ONE REMOTE CONTROLLER FOR 4 WINCHES


ENGINE
PHOTO
DISCRIPTION OF GOODS
CODE NO. WT-S6A2MPT-D-15GO OF USED "MITSUBISHI" MODEL S6A2MPT-D ENGINE (370PS).
USED "YANMAR" MODEL S185-ST MARINE DIESEL ENGINE OF 550PS/900RPM
UNUSED (NEVER USED) YANMAR MODEL 6GX-ET MARINE ENGINE WITH CLUTCH (2 UNITS FOR SALE)
FULL OVERHAULED MITSUBISHI DIESEL ENGINE MODEL S6B3-MPTA-G (382KW・520PS/1800RPM)
BRAND NEW YANMAR MARINE PROPULSION DIESEL ENGINE MODEL 4JHYE (35MHP/3400RPM ・38MHP/3600RPM)
UNUSED YANMAR BRAND MODEL S185AL-UT DIESEL ENGINE OF 600PS (441KW) 1200RPM


SIDE THRUSTER
PHOTO
DISCRIPTION OF GOODS
4 UNITS OF NEW SIDE THRUSTER CAPACITY 5 TONS WITH PROPELLER DIAMETER 1500MM (WITHOUT ENGINE).
*THIS SIDE THRUSTER IS USE FOR THE SHIP.


ROCK CHISEL
PHOTO
DISCRIPTION OF GOODS
CODE NO. WT-10T-CHISEL-5 OF ROCK CHISEL WEIGHT 10 TONS
CODE NO. WT-10T-ROCK CHISEL-7 OF ROCK CHISEL WEIGHT 10 TONS
CODE NO. WT-21T-CHISEL-8 OF ROCK CHISEL WEIGHT 21 TONS
CODE NO. WT-43T OF ROCK CHISEL WEIGHT 43 TONS


CRANE PARTS
PHOTO
DISCRIPTION OF GOODS
USED SKK FLOATING CRANE MODEL SKK-4000DT-N OF LIFT CAPACITY 350 TONS WITHOUT A BARGE.
NON-PROPELLED FLOATING CRANE BARGE 43M X 18M X 3M WITH SKK-1100DT-A CRANE OF LIFT CAPACITY 120 TONS.
USED "SKK" & "TUKASA" FLOATING CRANE・CRANE PARTS・CRANE ENGINE・GRAB BUCKET & ORANGE PEEL BUCKET, ETC.
USED SKK-500GDA & OTHER MODELS OF TURNTABLE WITH ROLLER BEARING.
USED SKK-500GDA & OTHER MODELS OF PINION GEAR.
USED SKK-600-OG-3 OF USED SKK-600GDA-H CRANE S/NO. 18160-019 & OTHER MODELS OF FLOATING CRANE.
USED SKK-700GDA & OTHER MODELS OF FLOATING CRANE.
USED TUKASA SE400LGP & OTHER MODELS OF TURNTABLE WITH ROLLER BEARING.
USED SKK-400GDA & OTHER MODELS OF FLOATING CRANE.
USED SKK-600GDA & OTHER MODELS OF TURNTABLE WITH ROLLER BEARING AVAILABLE FOR SALE.


TOP OF THIS PAGE




CONSTRUCTION MACHINERY


BULLDOZER
PHOTO
DISCRIPTION OF GOODS
USED "CATERPILLAR" D6HLGP BULLDOZER S/NO. 8FC05653 (MADE IN 1995)


EXCAVATOR
PHOTO
DISCRIPTION OF GOODS
USED "KOMATSU" PC400-6 EXCAVATOR S/NO. 32480 (MADE IN 2001)


WHEEL LOADER
PHOTO
DISCRIPTION OF GOODS
USED "FURUKAWA" MODEL FL302 WHEEL LOADER S/NO. 2814 (1533 HOURS)
USED "FURUKAWA" MODEL FL302 WHEEL LOADER S/NO. 2861 (1695 HOURS)
USED "KAWASAKI" MODEL KLD97ZA WHEEL LOADER S/NO. 97C3-1024 (MADE IN 2000)
BUCKET CAPACITY 5M3


ROUGH TERRAIN CRANE
PHOTO
DISCRIPTION OF GOODS
USED "KATO" MODEL KR25H-3L ROUGH TERRAIN CRANE S/NO. 243764 LIFTING CAPACITY 25 TONS
USED "TADANO" MODEL TR250M-5 ROUGH TERRAIN CRANE S/NO. FB0066 LIFTING CAPACITY 25 TONS


OFF ROAD DUMP TRUCK
PHOTO
DISCRIPTION OF GOODS
USED "CATERPILLAR" MODEL 771C OFF ROAD DUMP TRUCK LOADING CAPACITY 40 TONS S/NO.3BJ00210.
MADE IN 1994 (USA).  *LOCATION OF 771C DUMP TRUCK: JAPAN



ROAD MACHINERY


ASPHALT FINISHER
PHOTO
DISCRIPTION OF GOODS
USED "SUMITOMO" MODEL HA45W (WHEEL TYPE) ASPHALT FINISHER S/NO. HA450-0706
WITH THE EXTENSION SCREED.  ATTACHMENTS FOR PAVING UP TO 6.0M
USED GRADE CONTROLLER (SENSOR) AND THE RELATED GOODS  (CODE NO. WT-SENSOR-07062011S).
*THIS GRADE CONTROLLER (SENSOR) CAN BE USED FOR ANY MODEL OF THE ASPHALT FINISHER (PAVER).
USED "NIIGATA" BRAND ULTRASONIC GRADE CONTROLLER (SENSOR) AND THE RELATED GOODS
(CODE NO. NIIGATA-UGC-21)
USED "NIIGATA" ULTRASONIC FEED CONTROL FOR ANY MODEL OF THE ASPHALT FINISHER (PAVER).
USED "GLI" BRAND SLOPE CONTROLLER (SENSOR) AND THE RELATED GOODS  (CODE NO. GLI-SC-6)
USED "MITSUBISHI" MODEL MF55WH (WHEEL TYPE) ASPHALT FINISHER S/NO. A2F0-3095
WITH 1M (0.5M X 2 PIECES) EXTENSION ATTACHMENT FOR PAVING 2.5M TO 5.5M.
USED "NIIGATA" MODEL NFB6C-VDM CRAWLER TYPE ASPHALT FINISHER S/NO. NF6C-0080
WITH EXTENSION ATTACHMENT FOR PAVING FROM 2.5M TO 6.0M (MADE IN 1999).*ONLY USED 1310 HOURS
USED "NIIGATA" MODEL NFB63CVKB (CRAWLER TYPE) ASPHALT FINISHER S/NO. NFB6C-0383
WITH AUTOMATIC HYDRAULIC EXTENSION SCREED FOR PAVING 2.5M TO 6.0M
BRAND NEW "AB ELECTRIC" MODEL G32 GRADE CONTROLLER (SENSOR & THE RELATED GOODS) FOR ANY MAKE
AND ANY MODEL OF ASPHALT FINISHER (PAVER).
USED "NIIGATA" MODEL NFB6W1 (WHEEL TYPE) ASPHALT FINISHER S/NO. NFB6W10631 WITH AUTOMATIC HYDRAULIC
EXTENSION SCREED FOR PAVING 2.5M TO 6.0M (2231 HOURS)
USED "SUMITOMO" MODEL HA60W (WHEEL TYPE) ASPHALT FINISHER S/NO. HA450-1022
*PAVING WIDTH 2.5M TO 4.5M
USED "NIIGATA" MODEL NFB6W1 (WHEEL TYPE) ASPHALT FINISHER S/NO. NFB6W1-0425
WITH THE NEW (UNUSED) EXTENSION ATTACHMENT FOR PAVING 2.5M TO 6.25M.
USED "VOGELE" MODEL S1502 TYRE TYPE ASPHALT FINISHER WITH TAMPER AND VIBRATOR S/NO. 671024
(MADE IN 1989) 10909 HOURS.*PAVING WIDTH: 2.5M TO 4.75M.(MADE IN GERMANY)
USED "NIIGATA" MODEL NFB63C (CRAWLER TYPE) ASPHALT FINISHER S/NO. B63C0531
(MADE IN AUGUST 2002) 1335 HOURS. *PAVING WIDTH: 2.5M TO 4.5M
BRAND NEW EXTENSION SCREED ATTACHMENTS FOR "SUMITOMO" HA60C & HA60W ASPHALT FINISHER (PAVER).
*EXTENSION SCREED ATTACHMENTS 375MM X 4 SETS = 1.5 METER
USED "SUMITOMO" MODEL HA60W (WHEEL TYPE) ASPHALT FINISHER S/NO. HA450-0925.
*PAVING WIDTH 2.5M TO 4.5M
USED "SUMITOMO" MODEL HA45W (WHEEL TYPE) ASPHALT FINISHER S/NO. HA450-0861
(MADE IN 1993) WITH THE EXTENSION SCREED.  ATTACHMENTS FOR PAVING UP TO 6.0M


ASPHALT DISTRIBUTOR
PHOTO
DISCRIPTION OF GOODS
USED "HANTA" MODEL DS30DT ASPHALT DISTRIBUTOR WITH "MITSUBISHI" CHASSIS NO. FK615G510076
(MADE IN OCTOBER 1993). *THIS IS RIGHT HANDLE.


GUSS ASPHALT COOKER
PHOTO
DISCRIPTION OF GOODS
USED "LINTEC" MODEL GT-50 GUSS ASPHALT COOKER WITH "HINO" TRUCK CHASSIS NO. FR2KKB
(ENGINE MODEL K13D)


MACADAM ROLLER
PHOTO
DISCRIPTION OF GOODS
USED "DYNAPAC" MODEL CS12 MACADAM ROLLER S/NO. 1863 (2199 HOURS) MADE IN 1997.
USED "DYNAPAC" MODEL CS12 MACADAM ROLLER S/NO. 1864 (2586 HOURS) MADE IN 1997


TYRE ROLLER
PHOTO
DISCRIPTION OF GOODS
USED "SAKAI" MODEL TS150 TYRE ROLLER S/NO. 40745 (MADE IN 1983) 2457 HOURS.
USED "SAKAI" MODEL TS650C (HEAVY DUTY TYPE) TYRE ROLLER S/NO. 10193 (MADE IN 1995) 1326 HOURS.


TANDEM ROLLER
PHOTO
DISCRIPTION OF GOODS
USED "KOMATSU" MODEL JV70DW (7 TONS) VIBRATING TANDEM ROLLER S/NO. JV70DW1-10012 (780 HOURS).
USED "BOMAG" MODEL BW121AD (4 TONS) VIBRATING TANDEM ROLLER S/NO. 203700 (1849 HOURS)


VIBRATING ROLLER
PHOTO
DISCRIPTION OF GOODS
USED "KOMATSU" MODEL JV70DW (7 TONS) VIBRATING TANDEM ROLLER S/NO. JV70DW1-10012 (780 HOURS).
USED "BOMAG" MODEL BW121AD (4 TONS) VIBRATING TANDEM ROLLER S/NO. 203700 (1849 HOURS)
USED "SUMITOMO" MODEL HW-41VW-2 (4 TONS) VIBRATING COMBINED ROLLER S/NO. 41VW2-0401 (4263 HOURS)


TOP OF THIS PAGE




PLANT

ASPHALT PLANT & FILLER SILO & ASPHALT TANK & HOT MIX SILO
PHOTO
DISCRIPTION OF GOODS
CODE NO. WT-143AP OF USED "TANAKA" ASPHALT PLANT CAPACITY 60T/H TO 80T/H.
CODE NO. WT-162AP OF USED "NIIGATA" MODEL NP-1000CDMD ASPHALT PLANT S/NO. P10350
CAPACITY 60T/H TO 80T/H (MADE IN 1993)
FILLER SILO CAPACITY 35 TONS X 2 SETS.
USED "NIKKO" ASPHALT TANK CAPACITY OF 68 TONS X 2 SETS & 60 TONS X 2 SETS
USED "NIIGATA" HOT MIX SILO OF CAPACITY 120 TONS WITH SKIP ELEVATOR AND SKIP HOPPER.
USED "NIKKO" HOT MIX SILO CAPACITY 120 TONS WITH THE NECESSARY SKIP ELEVATOR, ETC.
*STILL WORKING NOW.


DRYER ・ BURNER
PHOTO
DISCRIPTION OF GOODS
USED "NIKKO" NAP-2000 DRYER OUTSIDE DIAMETER 2200MM X INSIDE DIAMETER 1850MM X LENGTH 8400MM
(37KW-4 POLE-1/30 GEARED MOTOR) WITH A BURNER MODEL NBU-2M AND OILING SUPPLY UNIT & BURNER' SUPPORTING STAND.
USED "NIKKO" MODEL NAP-3000 DRYER ASS'Y
USED "NIKKO" NAP-1600 BURNER UNIT AND DRYER ASS'Y.
USED "TANAKA" TAP-1500 DRYER ASS'Y
USED "NIIGATA" NP-1000 ASPHALT PLANT DRYER ASS'Y & BURNER
USED NIKKO NAP-500 BURNER FOR ASPHALT PLANT
*THIS BURNER ALSO CAN BE USED FOR NIIGATA NP-600 ASPHALT PLANT, TAP-600 OR OTHER MAKES.


RECYCLE PLANT
PHOTO
DISCRIPTION OF GOODS
USED "NAKAYAMA" RECYCLE CRUSHING PLANT CAPACITY 30T/H
FOR PRODUCING THE ASPHALT MATERIAL 0MM TO 13MM
USED RECYCLE CRUSHING PLANT CAPACITY 80T/H


STONE CRUSHING PLANT
PHOTO
DISCRIPTION OF GOODS
USED STONE CRUSHING & SCREENING PLANT CAPACITY 400T/H
UNUSED (NEVER USED) KYC SEMI-PORTABLE TYPE STONE CRUSHING &
SCREENING PLANT MODEL PFJ-4 (24" X 15" JAW CRUSHER) & PCS-900 (36" CONE CRUSHER)
WITH THE RELATED ACCESSORIES SUCH AS THE HOPPER, PLATE FEEDER, VIBRATING SCREEN,
MOTOR AND BELT CONVEYOR, ETC. EXCEPT THE GENERATOR. (CAPACITY: 30T/HOUR AT 20MM UNDER PRODUCTS).


CONCRETE BATCHING PLANT
PHOTO
DISCRIPTION OF GOODS


CONCRETE PUMP
CONCRETE PUMP
PHOTO
DISCRIPTION OF GOODS
6 UNITS OF USED "IHI" MODEL IPF110S-7E STATIONARY TYPE CONCRETE PUMP CAPACITY 10 ~ 95M3/HOUR
WITH MOTOR OUTPUT 110KW, 4 POLE.
MACHINE NO. IPA16011, IPA16012, IPA16013, IPA16014, IPA16015 & IPA16016 (6 UNITS AVAILABLE)
USED (SEMI-OVERHAULED) "IHI" MODEL IPF110S-8E STATIONARY TYPE CONCRETE PUMP S/NO. IPA16-032 CAPACITY 10 TO 95M3/HOUR WITH MOTOR OUTPUT 110KW, 4 POLE.
TYPE: HIGH PRESSURE & LOW PRESSURE CHANGEABLE PISTON TYPE



CONCRETE MIXER
CONCRETE MIXER
PHOTO
DISCRIPTION OF GOODS
CODE NO. KYC-5-1.5M3 OF KYC CONCRETE MIXER CAPACITY 1.5M3 (TWIN SHAFT TYPE)
CODE NO. KITAGAWA-6-2.0M3 OF KITAGAWA CONCRETE MIXER CAPACITY 2.0M3 (TWIN SHAFT TYPE)
CODE NO. KITAGAWA-8-3.3M3 OF KITAGAWA CONCRETE MIXER MODEL WHQ-3300H (ZCROSS TYPE)S/NO. 16Q018 OF CAPACITY OF 3.3M3
CODE NO. KYC-8-1.0M3 OF KYC CONCRETE MIXER CAPACITY 1.0M3 (TWIN SHAFT TYPE)
CODE NO. KYC-11-1.0M3 OF KYC CONCRETE MIXER CAPACITY 1.0M3 (TWIN SHAFT TYPE)



GENERATOR
GENERATOR
PHOTO
DISCRIPTION OF GOODS
USED "NIPPON SHARYO" NES800SM (800KVA) GENERATOR WITH "MITSUBISHI" S12A2-PTA ENGINE.( 3 UNITS)
USED "NIPPON SHARYO" MODEL NES400SM-2 (400KVA) GENERATOR S/NO. JF021400 WITH MITSUBISHI MODEL S6B3-PTA ENGINE
5 UNITS OF CATERPILLAR MODEL PGS400 GENERATOR WITH CAT. 3406TA ENGINE (365KW) 456KVA FOR SALE IN JAPAN (MADE IN THE UK)



OTHER PRODUCTS


TOP OF THIS PAGE