* WINTECH CO., LTD. * EXPORTER OF USED MACHINERY & WORK VESSELS IN JAPAN *
- 1000PS (500PS X 2 ENGINES) ANCHOR HANDLING TUG BOAT M/V. SHINSEI MARU NO.6
- PUSHER BOAT / TUG BOAT 3000PS ENGINE MADE IN JAPAN
- CODE NO. WT-452GD OF USED 10M3 GRAB DREDGER & PUSH BOAT OF 1100PS (550PS X 2 ENGINES)
- CODE NO. WT-389FB OF USED FLOATING CRANE VESSEL LIFTING CAPACITY 250 TONS & PUSH BOAT OF 1600PS
- SPRIT HOPPER BARGE 39.00M X 12.00M X 3.80M OF CAPACITY 700M3
- CODE NO. WT-395FB OF USED FLOATING CRANE VESSEL LIFTING CAPACITY 180 TONS(M/V. NISSHIN MARU)
- PILOT BOAT M/V. MARINE 2 & M/V. POLE STAR 2 FOR SALE
- 1100HP TUG BOAT/PUSHER BOAT (OVERALL LENGTH 23.78M) REGISTERED 21.79M X 6.40M X 3.50M WITH 550PS X 2 ENGINES *NAME OF VESSEL: CHIYO MARU NO.35
- CODE NO. WT-406FB OF USED FLOATING CRANE VESSEL LIFTING CAPACITY 180 TONS (M/V. TAKARA MARU NO.5)
- (NON-PROPELLED)"KURIMOTO" 8" SAND PUMP VESSEL (DREDGER)
- CODE NO. WT-413SC OF USED SAND CARRIER/DREDGER (M/V. TENJIN MARU NO.1)SELF-PROPELLED
- NON-PROPELLED FLOATING CRANE BARGE 43M X 18M X 3M WITH SKK-1100DT-A CRANE OF LIFTING CAPACITY 120 TONS
- ship
- CODE NO. WT-10T-ROCK CHISEL-7 OF ROCK CHISEL WEIGHT 10 TONS
- CODE NO. WT-5M3-OB-110HG (CAPACITY 5M3) ORANGE PEEL BUCKET
- CODE NO. WT-4.5M3-GB-67GH (CAPACITY 4.5M3) GRAB BUCKET
- CODE NO. WT-4M3-GB-56H (CAPACITY 4M3) GRAB BUCKET
- CODE NO. WT-3.5M3-GB-77GO (CAPACITY 3.5M3) GRAB BUCKET
- CODE NO. WT-6M3-GB-58H (CAPACITY 6M3) GRAB BUCKET
- CODE NO. WT-4M3-GB-73GO (CAPACITY 4M3) GRAB BUCKET
- CODE NO. WT-5M3-GDB-81GH (CAPACITY 5M3) GRAB DREDGER BUCKET
- CODE NO. WT-10M3-GDB-102N (CAPACITY 10M3) GRAB DREDGER BUCKET
- CODE NO. WT-3.2M3-OB-54H (CAPACITY 3.2M3) ORANGE PEEL BUCKET
- CODE NO. WT-3.5M3-OB-57H (CAPACITY 3.5M3) ORANGE PEEL BUCKET
- CODE NO. WT-4M3-OB-52H (CAPACITY 4M3) ORANGE PEEL BUCKET
- CODE NO. WT-5M3-OB-59H (CAPACITY 5M3) ORANGE PEEL BUCKET
- CODE NO. WT-5M3-GDB-118HG (CAPACITY 5M3) DREDGER BUCKET (GRAB BUCKET) *WEIGHT: 23 TONS
- CODE NO. WT-4M3-OB-157G (CAPACITY 4M3) ORANGE PEEL BUCKET
- CODE NO. WT-4M3-GB-158G (CAPACITY 4M3) GRAB BUCKET
- bucket
- "KOYO" TYPE KHW-2007 HYDRAULIC WINCH CAPACITY 15 TONS
- 4 UNITS OF "NITCHITSU" WINCHES (CAPACITY 30 TONS) AND ONE REMOTE CONTROLLER
- CODE NO. WT-S6A2MPT-D-15GO OF "MITSUBISHI" MODEL S6A2MPT-D ENGINE (370PS)
- USED "YANMAR" MODEL S185-ST MARINE DIESEL ENGINE OF 550PS/900RPM.
- FULL OVERHAULED MITSUBISHI DIESEL ENGINE MODEL S6B3-MPTA-G (382KW・520PS/1800RPM)
- UNUSED (NEVER USED) YANMAR 6GX-ET MARINE ENGINE WITH CLUTCH (2 UNITS FOR SALE)
- 4 UNITS OF NEW SIDE THRUSTER CAPACITY 5 TONS
- CODE NO. WT-43T OF ROCK CHISEL WEIGHT 43 TONS
- CODE NO. WT-10T-CHISEL-5 OF ROCK CHISEL WEIGHT 10 TONS
- CODE NO. WT-6M3-DB-167G (CAPACITY 6M3) GRAB BUCKET (DREDGER BUCKET) FOR SALE IN JAPAN. *MADE BY KOEI, JAPAN
- CODE NO. WT-6M3-DB-165G (CAPACITY 6M3) HEAVY DUTY GRAB BUCKET FOR SALE IN JAPAN
- CODE NO. WT-21T-CHISEL-8 OF ROCK CHISEL WEIGHT 21 TONS
- SKK-700GDA & OTHER MODELS OF FLOATING CRANE AVAILABLE FOR SALE.
- SKK-400GDA & OTHER MODELS OF FLOATING CRANE
- SKK-500GDA & OTHER MODELS OF PINION GEAR
- BRAND NEW YANMAR MARINE PROPULSION DIESEL ENGINE MODEL 4JHYE (35MHP/3400RPM ・38MHP/3600RPM) FOR SALE IN JAPAN
- UNUSED YANMAR BRAND MODEL S185AL-UT DIESEL ENGINE OF 600PS (441KW) 1200 RPM FOR SALE IN JAPAN
- SKK-600GDA & OTHER MODELS OF TURNTABLE WITH ROLLER BEARING
- "TUKASA" SE400LGP & OTHER MODELS OF TURNTABLE WITH ROLLER BEARING
- SKK-500GDA & OTHER MODELS OF TURNTABLE WITH ROLLER BEARING
- CODE NO. WT-4M3-GDB-127HG (CAPACITY 4M3) DREDGING GRAB BUCKET
- PUSHER BOAT/TUG BOAT OF 3000PS ENGINE FOR SALE IN JAPAN
- CARGO HOLD BARGE 82.5M X 18.0M X 5.6M (DRAFT: 4.9M) DEAD WEIGHT: 5500 TONS FOR SALE IN JAPAN (NON-PROPELLED)
- NON-PROPELLED FLOATING CRANE BARGE 43M X 18M X 3M WITH SKK-1100DT-A CRANE OF LIFT CAPACITY 120 TONS.
- USED SKK FLOATING CRANE MODEL SKK-4000DT-N OF LIFT CAPACITY 350 TONS WITHOUT A BARGE
- SKK-600-OG-3 OF USED SKK-600GDA-H CRANE S/NO. 18160-019 & OTHER MODELS OF FLOATING CRANE
- "SKK" & "TUKASA" FLOATING CRANE・CRANE PARTS・CRANE ENGINE・GRAB BUCKET & ORANGE PEEL BUCKET, ETC.
"KOYO" TYPE KHW-2007 HYDRAULIC WINCH CAPACITY 15 TONS
USED "KOYO" TYPE KHW-2007 HYDRAULIC WINCH CAPACITY 15 TONS.
(2 UNITS FOR SALE)
THE HYDRAULIC WINCH FITS 37KW MOTOR NOW.
THE PULL POWER WILL BE 20 TONS IF 37KW MOTOR CHANGED TO 55KW MOTOR.
Copyright(C) 2001 WINTECH CO., LTD. All Rights Reserved